Know this if you want to use a LPG or Propane gas safely

The rubber seal is a rubber that surrounds the mouth of the tube. A good gas tube will have a rubber seal when purchased. Also make sure that the rubber seal is pliable, smooth, not torn, and the size is right or perfectly fitted with the mouth of your gas cylinder. Meanwhile, check out the recommended propane companies if you need a trusted company to refill your gas for your business.

Install the regulator properly and correctly

After making sure the points above are correct, then you can start installing gas. When installing a regulator, make sure it is perpendicular to the neck of the tube, then press with all your strength with your hand. Turn the lock on the side of the regulator clockwise, or until the slope is 180 degrees.

Make sure there is no hissing sound

If you have installed a regulator, try to see if there is a hissing sound that is heard? If it’s not there, you can immediately turn on and use the gas stove. But if you hear a hissing sound, you should immediately remove the regulator, replace the rubber, then re-install the regulator. If the hissing sound is gone, then the gas installation is ensured to be safe.

Check the stove

Sometimes after the gas is installed, the stove does not start immediately. If this happens, try checking the needle indicator on the regulator. If the needle does not point to the right, the regulator might be damaged. But if the direction of the needle is right but the stove still does not want to light up, try pat and shake the tube slightly, then turn on the stove again. If it still doesn’t work, it’s better to re-exchange the gas you bought, because the possibility of the gas cylinder’s neck size is not in accordance with your regulator.

Hopefully with the tips above, you will no longer be confused when installing LPG gas at home. Make sure you follow all the instructions above correctly so that the installation process is safe.